Premium Ferrari body kits transform with precision-engineered , backed by over 10 years of luxury modification expertise.Elevate vehicle’s aerodynamics and aggressive styling.
Driven by comprehensive OE data system and advanced 3D precision modeling.Tuning body kit guarantees 1:1 precise fitment. Complete a full ferrari f8 tributo body kit upgrade in as little as two days.
Non-destructive, direct bolt-on installation cuts labor hours by 60%. Eliminate fitment issues and double your workshop bay capacity.
Adds over 50mm of width at the front axle and over 70mm at the rear, thereby increasing the track width and delivering stable grip when cornering.
Geometry designed at the air intakes aims to improve the airflow directed to the intercoolers by 10-15%. When your speed rises to 200 km/h, the additional 80-120 kg of downforce.
Equipped with components a hood and bumper that feature air guide holes, the airflow under the chassis is stabilized, reducing lift by 40% and increasing stability at high speeds.
The hybrid powertrain presents complex thermal management requirements, necessitating the addition of air splitters, front lip, and high-downforce rear wing.
Emphasizing an OEM+ style, these parts are 1:1 direct replacements, offered in either high-gloss or matte dry carbon fiber, to enhance the overall premium feel and finish.
The rear diffuser and spoiler components of the body kit are perfectly compatible with the factory active aero lift/lowering logic, with 100% fitment guarantee.
All factory sensor mounts, radar brackets, camera positions, and active aero actuator interfaces are preserved
Crafted from aerospace-grade pre-preg dry carbon fiber, with typical tensile strength of 4,900 MPa and tensile modulus of 234,500 MPa.
Tested in 50% hydrochloric、sulfuric、phosphoric acid for 200 days with no significant change in diameter, rigidity, or strength.
ISO 9001 certified,the world’s most recognized and adopted quality management standard, accepted in 170+ regions globally.
The lightweight design of this aftermarket body kit delivers a transformative upgrade.Reduces total weight by up to 40% compared to OEM steel components. By contrast, carbon fiber is 70–80% lighter than steel and 30–40% lighter than aluminum for the same volume, with a density of just 1.5 g/cm³ versus 7.85 g/cm³ for steel and 2.7 g/cm³ for aluminum.Lightweight construction reduces unsprung mass and improved power to weight ratio
Super car body kit‘s high‑downforce carbon rear wing and diffuser generate up to 360 kg of downforce at 250 km/h,improving high‑speed cornering stability.When you driving on mountain roads or speed competition,the Aerodynamics kit enhance effciency and reduced unsprung mass.Each component has its own mission, comprehensively enhancing steering precision, eliminating body roll and other driving effects.
Shanghai Bamboo Auto Parts Co., Ltd.
Bamboo is an integrated manufacturing and trading company with a 10,000 m² modern production facility, dedicated to delivering premium upgrade solutions for Ferrari and other luxury supercars. With over 10 years of experience in the automotive parts export industry and a team of senior engineers providing comprehensive technical support, we truly understand the art of modification. Every product we craft combines forward-looking exterior styling with precise aerodynamic engineering, offering a complete upgrade package that enhances both visual presence and on‑road performance.
In this case, you’ll see how our carbon fiber components refine the airflow. Ferrari 488 GTB Facelift kit upgrade Mansory Siracusa 4XX styling. Don’t just change the look and optimize the downforce. Look closely at the before and after: the front splitter isn’t just lower—it’s more aggressive, more purposeful, and strictly engineered to complement Ferrari’s original lines while giving it that bespoke stance.
When the Ferrari 488 reaches speeds exceeding 200 km/h, the aero package generates approximately 45 kg of extra downforce on the front axle, delivering a substantial improvement in front-wheel traction and steering response
Combined with a 35 mm-lowered sport suspension, this setup maximizes the high-pressure airflow beneath the chassis, generating a pronounced ground effect. Meanwhile, the two-piece rear wing to avoid the factory central visibility blind spot,delivers approximately 60 kg of additional downforce to the rear axle.
Fender vents effectively channel high-speed turbulent airflow out of the front wheel arches, reducing internal pressure by approximately 15% and thereby minimizing front-axle lift.
For side skirt air splitters extend outward by roughly 25 mm, visually creating a muscular, aggressive stance without any cutting or modification to the original body structure .
B2B Sales Director
Technical Engineer
Sales Specialist
| Original Model | Upgrade Kit Style | Key Features |
|---|---|---|
| Ferrari SF90 | SF90 XX / Mansory Style | Aerospace-grade dry carbon, extreme hypercar downforce, and fixed rear wing integration. |
| Ferrari 458 | F8 Style Conversion | Complete modern facelift, 1:1 precise fitment, merging the classic chassis with modern twin-turbo aesthetics. |
| Ferrari 296 | Ryft Style | Active aero integration, optimized side intakes, and precision 3D-scanned aggressive ground effects. |
| Ferrari Roma | Mansory Style | Elegant OEM+ carbon accents, mirror-finish anti-UV clear coat, and non-destructive bolt-on installation. |
| Ferrari 488 | 488 Pista / Mansory Style | S-Duct front aero conversion, enhanced side cooling intakes, and exact factory mounting points. |
| Ferrari 599 | Vorsteiner Style | Classic V12 GT enhancement, precision-molded rear diffuser, and improved engine bay heat extraction. |
| Ferrari F8 | Mansory / Novitec Style | Premium dry carbon splitters and spoilers, delivering a plug-and-play upgrade with zero structural modifications. |
See what professional installers say about our Ferrari aero upgrades.
"As a tuning shop, fitment is everything. Bamboo's 488 kit bolted right onto the OEM points. Zero trimming or modification needed. It saved our technicians hours of labor."
Tuning Shop Director — California, USA
"The dry carbon quality on this SF90 front lip is insane. The weave pattern matches the factory Ferrari carbon perfectly, and the UV clear coat is mirror-smooth."
SF90 Owner — Dubai, UAE
"Their OE number management is spot on. Ordered a full aerodynamic set for a client's 599 GTB and got exactly the right specs. Fast international shipping and no compatibility issues."
Auto Parts Distributor — Munich, Germany
Transparent & efficient B2B workflow from inquiry to installation.
Tell us your model, desired kit configuration, and any custom requirements.
Receive a detailed quotation within 24 hours. Confirm specs, pricing, and timeline.
We manufacture your kit with real-time photo/video updates throughout the process.
Carefully packaged and shipped worldwide with full tracking. Install and enjoy!
Our professional OEM/ODM workflow brings your unique luxury automotive design to life.
Brand customers tell us their idea or show us any photo about what they want to make.
Collaborating with clients to discuss and finalize design proposals.
Creating a 3D model according to the client's specifications to ensure product dimensions.
We proceed with customizing and developing the product molds.
Producing products based on the customized models.
Packaging as agreed, handing over to designated logistics for delivery completion.
Top-grade carbon fiber upgrade solutions for luxury supercars.
If you have any questions or needs, contact us today. You can fill out the form on the right or call us for consultation. Our team is available 24/7 to stay informed about our luxury exterior accessories.
Support customized services or OEM/ODM cooperation
